The NDT DR dryer was created by AGFA-Gevaert, the global leader in photo processing systems. The device is used for operational drying of X-ray film and is used in photo labs of industrial non-destructive testing, when you need to organize a professional workspace for manual processing of images in an accelerated mode. The machine has several advantages compared with convection ovens and models of open type dryers.
Purpose and application
The drying machine AGFA NDT DR is designed for drying X-ray films of unlimited length and width from 6 to 37 cm with the manual method of photochemical processing. The design provides two sliding shelves on which you can place up to 10 shots. The device is used in all industries and is suitable for diagnostic, research and any other laboratories NK.
The weight of this model is only 24 kg, and its dimensions allow it to be installed compactly, without cluttering up the working space. Therefore, the device is widely used not only in stationary conditions, but also in field testing laboratories.
The principle of operation of the dryer AGFA NDT DR is quite simple. X-ray film undergoes a cycle of additional washing in special tanks, after which it is passed through squeezing rubber rollers that remove excess moisture. Then the film is moved to the drying section, where for several minutes it is dried on both sides and fed to the receiving tray.
Key Benefits of the AGFA NDT DR Dryer
The AGFA NDT DR dryer is equipped with a method of thermoradiation drying, that is, infrared radiation. This solution allows you to achieve rapid and uniform removal of moisture, which in turn has a positive effect on the quality and stability of the image.
In the electronics of the drying apparatus AGFA NDT DR, it is possible to adjust the drying temperature and the rate of passage of the films. At the same time, this model requires a minimum amount of time to warm up after switching on and, accordingly, to prepare for work. All of these factors provide high performance machines. At the same time, it has low heat emission and is made in a design convenient for operation and transportation. This distinguishes the AGFA NDT machine from convection dryers and open type apparatus.
Supply
The AGFA NTD DR dryer is supplied complete with a water supply tank, a power cable, trays for feeding and receiving films.
Specifications
- Dimensions, cm 60x83x35
- Weight 24 kg
- Power supply 220-240 V / 50/60 Hz (fuse 10 A)
- Power, W 1600
- Recommended speed for AGFA D film is 14 cm / min. - level 1
- Recommended drying temperature 61ºС (level 5)